6.5. Dismantling of the sensor distributor of ignition

 PERFORMANCE ORDER

We remove the ignition sensor distributor (see Removal of the sensor distributor of ignition).
We remove a sensor distributor rotor (see Removal of a rotor of the sensor distributor of ignition).

To thin small beards we beat out a pin …

… also we remove from the roller a maslootrazhatel and a washer.

We take out the roller from the distributor case.

Having hooked the thin screw-driver, we remove a lock washer of draft of the vacuum regulator of an advancing of ignition.

We hook the screw-driver draft of the regulator and we remove it from a pin of a rotary plate.

By the Shlitsevy screw-driver it is turned off two screws of fastening of the vacuum regulator of an advancing of ignition.

This screw fixes sensor wires from movements by the extended end without carving up.

We remove the vacuum regulator.

By the Shlitsevy screw-driver it is turned off two screws of fastening of the contactless sensor.

We release a plait of wires of the contactless sensor.

By the Shlitsevy screw-driver it is turned off two screws of fastening of the socket of the sensor …

… also we remove the sensor with wires and the socket.

By the Shlitsevy screw-driver it is turned off two screws of fastening of a rotary plate …

… also we take out a rotary plate with the bearing.

We assemble the ignition sensor distributor upside-down.