6.4. Removal of the sensor distributor of ignition

 PERFORMANCE ORDER

We remove a hose from the union of the case of the vacuum regulator of an advancing of ignition.

We uncover the sensor distributor (see Removal of a cover of the sensor distributor of ignition).

On a flange of the case of the sensor distributor and the block of cylinders we put a tag.

We mark on the sensor distributor case (or on a cover of a head of the block of cylinders) the place to which the contact of a rotor is directed.

Cap key "on 13" we turn off a nut of fastening of a clamping level.

We remove a clamping level.

We take out the sensor distributor from a nest of the block of cylinders.

The screw-driver wrung out a spring clamp of the socket …

… also we disconnect the socket.

Between the privalochny planes of the sensor distributor and block of cylinders laying is established.

We install the sensor distributor upside-down, being guided on tags.