6.3. Removal of a rotor of the sensor distributor of ignition

 PERFORMANCE ORDER

On the engine we remove a rotor (runner) for its replacement or for access to the mechanism of the centrifugal regulator.

Having unfastened latches, we uncover the sensor distributor with high-voltage wires.

By the Shlitsevy screw-driver it is turned off two screws of fastening of a rotor to a basic plate of the centrifugal regulator …

… also we remove a rotor.

We establish a rotor upside-down. At the same time …

… the square ledge of a rotor has to get to a groove of a basic plate, and a cylindrical ledge – to an opening (for descriptive reasons the sensor distributor is removed).