6.2. Removal of a cover of the sensor distributor of ignition

 PERFORMANCE ORDER

We take out high-voltage wires from a cover.

We unfasten two spring latches of fastening of a cover …

… also we uncover.

For replacement of a piece of coal (the sprung contact) of the central electrode we turn a piece of coal counterclockwise …

… also we take out it together with a spring from a cover nest.

We separate a spring and a piece of coal.

We establish an ignition sensor distributor cover upside-down. At the same time …

… the groove of a cover is combined …

… with the plastic clamp installed in the sensor distributor case.

We connect wires to a cover according to the numbering of cylinders put on a cover.