5.2.11. Removal of a cable and pedal of the drive of a butterfly valve

 PERFORMANCE ORDER

We shift a protective silicone cap from a cable cover tip.

Two keys "on 13" we weaken nuts of fastening of a cover of a cable of the drive of the gate to an arm.

Having turned off a nut...

... we bring a cable out of an arm cut.

Having removed a spring clamp, …

... we bring a cable tip out of a gate drive pulley.

In salon we hook the screw-driver a tip of a cable and we remove it from a drive lever finger.

We take out a cable cover from the rubber plug of a guard of a front.

Having hooked the screw-driver the rubber plug, we take out it from a front guard.

We take out a cable of the drive of a butterfly valve.

For removal of a pedal...

... in salon a head "on 13" we turn off two nuts of fastening of an arm of a pedal...

... also we remove a pedal with an arm.

We establish a pedal and a cable of the drive of a butterfly valve in the return sequence.
At assembly we adjust the drive so that at the released and pressed pedal the gate, respectively, was completely closed and completely open.