3.4. Replacement of laying of a cover of a head of the block of cylinders

 PERFORMANCE ORDER

On the vpryskovy engine we disconnect tubes of a fuel stage, a cable of the drive of a butterfly valve and a hose of the vacuum amplifier of brakes from the arms fixed on a head of the block of cylinders. We remove a hose of the vacuum amplifier of brakes from the receiver union. We disconnect a hose of ventilation of a case from the bringing air hose.

Head "on 10" we turn off eight nuts of fastening of a cover of a head of the block of cylinders.

We remove fastening arms from hairpins of a head of the block of cylinders …

… hose of the vacuum amplifier of brakes, …

… the giving tube of a fuel stage, …

… drain tube of a fuel stage …

… and cable of the drive of a butterfly valve.

We remove clamping washers of a cover from hairpins of a head of the block of cylinders.

We uncover heads of the block of cylinders with laying.

On the carburetor engine before removal of a cover of a head of the block of cylinders we dismantle the case of the air filter (see Removal of the case of the air filter) and we disconnect a cable of the drive of the air gate and a hose of discharge of fuel from the carburetor. We disconnect a high-voltage wire from the ignition coil. We disconnect from the arm fixed on a head of the block of cylinders, a returnable spring of drafts of the drive of butterfly valves of the carburetor (see Removal of the carburetor from the engine).
We turn off nuts of fastening of a cover of a head of the block of cylinders.

We remove an arm of fastening of a returnable spring from a block head hairpin.

We dismantle a cover of a head of the block of cylinders of the carburetor engine similar to removal of a cover on the vpryskovy engine.
Having established new laying, we collect details upside-down.