3.28. Replacement of laying of the pallet of a case of the engine on the car

 PERFORMANCE ORDER

Work is carried out on a viewing ditch or the elevator.

We remove a plate of protection of the pallet of a case and a mudguard of the engine.
We merge oil from the engine (see Replacement of oil in the engine).
We turn off nuts of fastening of pillows of the left and right support of the power unit to arms of a cross-piece of a forward suspension bracket (see Removal of support of the power unit).
We disconnect fastening of a reducer of the forward bridge to arms of a suspension bracket of the power unit and block of cylinders of the engine (see Removal of a reducer of the forward bridge).
Having substituted an adjustable emphasis under a coupling case, …

… we raise the power unit.

For fixing of the power unit...

... we insert wooden whetstones between pillows of support and arms of a suspension bracket...

... also we lower an adjustable emphasis.

Head "on 10" we turn off nineteen bolts of fastening of the pallet of a case to the block of cylinders.

We lower the case pallet.

We bring laying of the pallet of a case out of a reception branch pipe of the oil pump and the directing tube of the index of level of oil.

We remove laying.

Having cleared the privalochny planes of the block of cylinders and the pallet of a case, we establish new laying. Assembly is carried out in the return sequence.