3.21. Removal of a receiver of the vpryskovy engine


We disconnect a cable of the drive of a butterfly valve from a pulley of throttle knot (see Removal of a cable and pedal of the drive of a butterfly valve).

Key "on 10" we turn off two bolts of fastening to a receiver of an arm of a cable of the drive of a butterfly valve...

... also we remove an arm with a cable.

We remove throttle knot from a receiver, without disconnecting from knot hoses of a supply and removal of cooling liquid, ventilation of crankcase gases and a purge of an adsorber (see Removal of throttle knot).

Passatizhami we weaken a collar of fastening of a hose of the vacuum amplifier of brakes to a receiver branch pipe...

... also we remove a hose from a branch pipe.

We disconnect a fuel pressure regulator hose.

Head "on 13" we turn off five nuts of fastening of a receiver to an inlet pipe.

... also we remove a receiver from pipe hairpins.

We remove sealing laying.

On high heels of an inlet pipe remote laying is established.

We establish a receiver in the return sequence.