3.16. Replacement of a back epiploon of a bent shaft

 PERFORMANCE ORDER

Work is carried out on a viewing ditch or the elevator.

We dismantle the conducted and conducting clutch plates (see Replacement of the conducted and conducting clutch plates).
We roll a bolt of fastening of the transmission in a carving opening of the block of cylinders.

Head "on 17" we turn off six bolts of fastening of a flywheel. We hold a bent shaft from a pro-collar the assembly shovel implanted between teeths of a flywheel and leaning on the screwed bolt.

We remove a plate...

... and flywheel.

Head "on 10" we turn off two nuts of fastening of a cover of a case of coupling...

... also we remove it.

Having hooked the screw-driver an epiploon...

... we take it from the holder.

We oil a working edge of a new epiploon engine.

Using an old epiploon as a mandrel, we press a new epiploon.

We establish the dismantled details in the return sequence.