3.15. Replacement of a forward epiploon of a bent shaft.

 PERFORMANCE ORDER

Work is carried out on a viewing ditch or the elevator.

We remove an engine case pallet mudguard. (see Removal of a plate of protection of the pallet of a case and mudguards of the vpryskovy engine, and Removal of a plate of protection of the pallet of a case and mudguards of the carburetor engine).
Having included the 1st transfer and having slowed down the car the parking brake...

... a key "on 38" we weaken a nut of fastening of a pulley of a bent shaft.

We weaken a belt of the drive of the pump of cooling liquid (see Adjustment of a tension and replacement of a belt of the drive of the pump of cooling liquid) and we remove it from a pulley of a bent shaft.
Having finally turned off...

... we remove a nut of fastening of a pulley of a bent shaft.

We remove a pulley from a sock of a bent shaft.

We hook a forward epiploon of a bent shaft the screw-driver...

... also we take out it from a camshaft drive cover nest.

Having oiled engine a working edge of a new epiploon...

... we press it a tool head of the suitable size (or a pipe piece).

It is also possible to press an epiploon in a different way.

Having inserted a new epiploon into a cover nest, we establish on a bent shaft a pulley with an old epiploon on a shaft.

Tightening a nut of fastening of a pulley, we press a new epiploon against the stop.
Having turned off a nut of fastening of a pulley, we remove a pulley and an old epiploon.
We mount details in the return sequence.