3.10. Removal of a natyazhitel of a chain of the drive of the camshaft of the carburetor engine

 PERFORMANCE ORDER

Natyazhitel is established in a forward part of a head of the block of cylinders (on the right side) under the taking-away cooling shirt branch pipe.

Key "on 10" we turn off two nuts of fastening of a natyazhitel to a head of the block of cylinders.

We take out a natyazhitel...

... also we remove sealing laying.

Having clamped a natyazhitel in a vice, a key "on 13" we turn off the cap-type nut.

We check serviceability of a collet clip.

At breakage of a pad of a clip we change a cap or a natyazhitel assembled.
Before installation of a natyazhitel utaplivay a plunger in the case of a natyazhitel against the stop and, holding a plunger in such situation, …

… we tighten the cap-type nut.

It is desirable to grease new laying with sealant.
We establish a natyazhitel in the return sequence. We regulate a chain tension (see Adjustment of a tension of a chain of the drive of the camshaft of the carburetor engine).