23.7. Removal of the central nozzles and air ducts of heating of glasses

 PERFORMANCE ORDER

We remove the dashboard (see Removal of the dashboard).
From a reverse side of the dashboard …

… by the crosswise screw-driver it is turned off two self-tapping screws of fastening of the case of nozzles.

We remove the case of nozzles with a sealant.

We remove a sealant.

At installation of the case of nozzles on the dashboard …

… it is necessary to put on a case ear a dashboard ledge (the sealant is for descriptive reasons removed).

For removal of air ducts of heating of glasses …

… a key "on 10" we turn off a nut of fastening of the right air duct of heating of side glass.

We remove the right air duct.

Similarly we remove the left air duct of heating of side glass.
We disconnect draft of the gate of the air duct of heating of a windshield (see Removal of a box of airinflow, a casing of a radiator, flexible drafts of the drive of a heater and arm of control levers a heater).
We take away the upper edge of the air duct of heating of a windshield, at the same time eyes descend from hairpins of fastening of the dashboard. Having pulled up, we bring an air duct branch pipe out of a radiator casing …

… also we remove the air duct of heating of a windshield.

We install air ducts in the return sequence.