23.3. Removal of the fan of a heater

 PERFORMANCE ORDER

We disconnect "minus" a wire from the rechargeable battery.
We remove the panel of fastening of the radio receiver (see Removal of the panel of fastening of the radio receiver).

Head "on 10" we turn off a nut of fastening of the relay breaker of indexes of turn and the alarm system …

… also we remove a tip of a "minus" wire of the electric motor of the fan of a heater (black color) from a hairpin.

On the same hairpin two more plugs of "minus" wires fasten.

On a photo 1–2 dashboard are for descriptive reasons removed.

On the right side of a casing of the fan we release draft from under a spring collar.

We hook the shlitsevy screw-driver and we disconnect four (on two from each party) spring brackets of fastening of a casing of the fan.

We remove the fan casing directing a casing and the fan.

We take out the directing casing from a fan casing.

We hook the shlitsevy screw-driver and we disconnect two spring brackets of fastening of the fan.

We disconnect a fan wire from the additional resistor …

… also we take out the fan from a casing.

We remove rubber pillows of the electric motor.

We hook the shlitsevy screw-driver a lock washer …

… also we remove it.

We remove a krylchatka of the fan.

Assembly and installation of the fan of a heater is carried out in the return sequence.