22:28. Removal of the dashboard

 PERFORMANCE ORDER

We disconnect the main cylinder of the hydroproofreader of headlights from the dashboard (see Removal of the hydroproofreader of headlights) and the switch of lighting of devices (see Removal of the switch of lighting of devices).
We remove a combination of devices (see Removal of a combination of devices).
On the car with the carburetor engine we remove the drive of the air gate (see Removal of the drive of the air gate)
On the car with the vpryskovy engine it is disconnected two sockets of the indicator of a condition of the FPÖ (see Removal of the control unit (immobilizer) and the indicator of a condition of the automobile anticreeping system (AAS)).
We remove the panel of fastening of the radio receiver (see Removal of the panel of fastening of the radio receiver).

By the crosswise screw-driver it is turned off three self-tapping screws of fastening of an upholstery of the right rack of a wind window …

We remove an upholstery.

Similarly we remove an upholstery of the left rack of a wind window.

The crosswise screw-driver it is turned off two screws of fastening of an arm of control levers by a heater to the dashboard.

The crosswise screw-driver we unscrew the self-tapping screw in the lower left part of the dashboard.

Head "on 10" we turn off two nuts in the top part of a nest of a combination of devices (the steering wheel is for descriptive reasons removed).

Key "on 8" we turn off a bolt in the right part of a nest of a combination of devices.

Head "on 10" we turn off two nuts in the top part of a ware box.

The crosswise screw-driver unscrewed one self-tapping screw in the bottom left corner of a ware box …

… and one – in lower the right.

The crosswise screw-driver we unscrew the self-tapping screw in the lower right part of the dashboard.

We remove the dashboard from hairpins, having pulled on ourselves, …

… also we take out it.

We install the dashboard in the return sequence.