22:27. Removal of the panel of fastening of the radio receiver

 PERFORMANCE ORDER

We remove the panel of fastening of the radio receiver at dismantle of the dashboard and for access to a heater.
We remove the ware shelf (see Removal of the ware shelf).
We unscrew the self-tapping screw of fastening of facing of a tunnel of a floor to the panel of fastening of the radio receiver (see Removal of facing of a tunnel of a floor).

Having hooked the screw-driver, we take out the switch of tail fog light.

Having marked sockets of wires, we disconnect them.

Having removed the back door glass heating switch, we disconnect a block of wires.

Having removed the heater electric motor switch, we mark sockets of wires and we disconnect them.
Having removed the switch of a cleaner and washer of glass of a door of a back, we disconnect a block of wires.

Having hooked the screw-driver, we take out the switch of external lighting.

We disconnect a block of wires.

Having hooked the screw-driver, …

… we disconnect the control lever handle the airinflow gate.

Similarly we remove handles of control of the gate of heating of a windshield and the heater crane.

The crosswise screw-driver we unscrew the self-tapping screw of the right fastening of the panel of the radio receiver to the dashboard.

Similarly we unscrew the self-tapping screw of the left fastening of the panel of the radio receiver.

Having hooked the screw-driver from above in two places the panel of fastening of the radio receiver, …

… we take away it from the dashboard.

We disconnect two sockets of lamps of illumination of control levers a heater.

We remove the panel of fastening of the radio receiver.

We install the panel of fastening of the radio receiver in the return sequence.