22:25. Removal of facing of a tunnel of a floor

 PERFORMANCE ORDER

We remove facing of a tunnel of a floor for access to control levers the transmission and the transfer case.

The crosswise screw-driver we unscrew the self-tapping screw of fastening of facing of a tunnel of a floor to the panel of fastening of the radio receiver.

By the same screw-driver it is turned off four self-tapping screws of fastening of facing to a tunnel …

… and one self-tapping screw located under an ashtray.

Having raised facing, …

… we disconnect sockets of the lighter and its illumination.

We bring a facing arm out of the panel of fastening of the radio receiver …

… also we remove facing of a tunnel of a floor.

We establish facing in the return sequence.