22:21. Removal of the drive of the lock of a door of a back

 PERFORMANCE ORDER

We remove the left upholstery of salon (see Removal of upholsteries of salon).

By the crosswise screw-driver it is turned off six self-tapping screws of fastening of facing of a threshold of a door of a back …

… also we remove facing.

By the crosswise screw-driver it is turned off two screws of fastening of the handle of the drive of the lock.

On inside of the panel there is an arm which of eye we take out a drive cover emphasis …

… also we remove the handle with draft of the drive in the lower window of the internal panel of a sidewall.

The screw-driver we release a collar of fastening of draft of the drive of the lock on the left sidewall of a body …

… and two collars on a back door threshold.

We disconnect draft of the drive from the lock case.

We extend the drive because of the internal panel of a sidewall …

… also we remove it.

It is possible to replace the lock drive handle, without dismantling the drive. For descriptive reasons replacement of the handle is shown on the removed drive.

Passatizhami we straighten the end of draft.

Having shifted the plug, …

… we take out draft from a handle eye.

We assemble the drive in the return sequence.