22:14. Door glass replacement

 PERFORMANCE ORDER

We remove a door upholstery (see Removal of an upholstery of a door).

We hook the shlitsevy screw-driver …

… also we remove an internal sealant of glass.

Similarly we remove an external sealant of glass.

We take out a protective film.

Through a window of the internal panel of a door by the crosswise screw-driver it is turned off two screws forward …

… and two screws of back fastening of a cable of a window regulator to the holder of glass.

Having lowered the forward end of glass in a door, …

… we take out glass.

If the glass acquired instead of broken has no holders with arms, then we clear old holders of splinters of glass and old rubber laying. We mark new glass so, …

… that the distance from a back end face of glass to a back end face of a forward holder of glass equaled 400 mm...

… and to a back end face of a back holder – 125 mm.

For installation of holders we cut out two pieces of new crude rubber.

We dip one piece of crude rubber into the container with gasoline …

… also we establish on glass on tags.
Opirayem glass on the soft basis …

… and accurately napressovyvay I will fill with the hammer with crude rubber on glass.

Similarly napressovyvay the second holder on tags.
Before glass installation …

… we check a condition of the rubber buffer of glass.

We establish glass in the return sequence.