22:12. Removal of the lock of a door

 PERFORMANCE ORDER

We remove a door upholstery (see Removal of an upholstery of a door).

By the crosswise screw-driver it is turned off two screws of fastening of the internal handle of a door.

Having brought the handle to a window of the internal panel of a door, …

... we disconnect draft from the internal handle of a door.

We turn out the button of blocking of the lock.

Passatizhami is disconnected draft of the button of blocking from the lock …

… also we remove draft.

For simplification of access to the lock it is necessary to take away a glass guide. For this purpose …

… by the crosswise screw-driver it is turned off the top and lower screws of fastening of a guide of glass.

We take away a glass guide to a forward part of a door.

Having hooked the screw-driver, we remove the draft going from the roller of switching off of the lock to a lock switch lead.

By the crosswise screw-driver it is turned off three screws of fastening of the lock to a door end face.

We bring the lock out of a window of the internal panel of a door.

Felt-tip pen we lead round a clamp contour on a door rack.

Head "on 10" we turn off three bolts of fastening of a clamp to a body (at adjustment – we weaken) …

... also we remove a door clamp together with adjusting laying.

At installation of a new clamp a set of laying is kept.
We grease the new lock with any plastic lubricant, we connect to it draft with the handle and we install on the car as it should be, the return to removal. We establish a clamp and we check operation of the lock.