21.9.1. Removal of the understeering three-lever switch

 PERFORMANCE ORDER

We disconnect "minus" a wire from the rechargeable battery.
We remove a steering wheel (see Removal of a steering wheel).

The crosswise screw-driver we unscrew the self-tapping screw of fastening of the lower part of a casing to the understeering switch …

… and four screws connecting the top and lower parts of a casing.

Having lowered the lower part of a casing, we take out the switch of the alarm system.

Having hooked the screw-driver, we disconnect a collar of fastening of wires of the understeering switch.

We remove the lower part of a casing.

We remove a rubber ring from the ignition lock.

We remove the top part of a casing.

We disconnect blocks of wires of the understeering switch.

Head "on 8" we weaken a bolt of a collar of fastening of the understeering switch.

We remove the understeering switch.

Assembly is carried out in the return sequence, at the same time before installation of a steering wheel …

… of the understeering switch we establish the mobile ring which is (switching off) so that the ledge with a hole (for descriptive reasons the hole is filled in with white paint) settled down from above, …

… and we put on a steering wheel in provision of the movement on a straight line.