20.6. Removal of the main brake cylinder

 PERFORMANCE ORDER

We remove an arm of a support of a spare wheel (see Removal of a pipe and a support of a spare wheel).

Passatizhami is weakened collars of fastening of flexible hoses to unions of the main brake cylinder.

Carefully holding unions, we remove hoses.

We merge brake fluid from a tank in the substituted capacity.
For replacement of the union of the main brake cylinder …

… we hook it the screw-driver …

… also we take out from a nest of the main brake cylinder.

We hook the screw-driver the rubber connecting plug …

… also we take out it.

For removal of the main brake cylinder …

… a special key "on 10", covering five sides of a nut, we unscrew unions of four brake tubes.

We take away tubes from the brake cylinder.

Cap key "on 17" we turn off two nuts of fastening of the main brake cylinder to the vacuum amplifier …

… also we remove the main brake cylinder.

We install the main brake cylinder in the return sequence. We pump over system of a hydraulic actuator (see Pumping of brakes).