19.9. Removal of a steering column

 PERFORMANCE ORDER

We remove a steering wheel (see Removal of a steering wheel). We remove facing casings of a steering column (see Removal of the understeering three-lever switch). We remove the ignition switch (see Removal of the switch of ignition).

Key "on 13" we turn off a nut of a bolt of fastening of a fork of the lower cardan hinge of an intermediate shaft to a shaft of a worm of the steering mechanism, holding a bolt from a provorachivaniye a key of the same dimension.

We take out a bolt.

Two bolts of forward fastening of an arm of a shaft of steering to a body have srezny heads.

Striking blows with a chisel to heads of bolts, we weaken their inhaling …

… and passatizham we turn off bolts.

We remove the fixing plates of bolts.

Head "on 13" we turn off two nuts of forward fastening of an arm.

We lower a steering shaft.

Having unclenched the screw-driver a cutting fork of the cardan hinge, …

… we pull together a shaft from shliyets of a shaft of a worm of the steering mechanism.

For removal of an intermediate shaft …

… two keys "on 13" we turn off a nut of a bolt of fastening of a fork of the cardan hinge of an intermediate shaft to the top shaft of steering.

We take out a bolt and we remove the plug of a "mass" wire.

We pull together a fork of the cardan hinge from shliyets of the top shaft of steering.

We collect and establish a steering column in the return sequence.