19.4. Removal of side draft

 PERFORMANCE ORDER

Work is carried out on a viewing ditch or the elevator.

We hang out and remove a wheel.
For removal of the right side draft we turn a wheel against the stop to the left.

Passatizhami we take out the forelock …

… and a key "on 22" we turn off a nut of fastening of side thirst for the lever of a rotary fist.

The stripper pressed off a spherical finger from the lever.

It is possible to use a bifurcate stripper.

In the absence of a stripper we turn off a nut not up to the end, we implant an assembly shovel into a raspor between side draft and the lever of a rotary fist and we strike with the hammer blows to a lever end face.

The spherical finger from the lever can also be vypressovat, having struck sharp blow from below with a reverse side of the hammer to the lever of a rotary fist near the hinge.

We take out a spherical finger from an eye of the lever of a rotary fist.

The stripper pressed off a spherical finger of draft from the pendular lever.

The finger can also be vypressovat, having struck sharp blow from below with the hammer through a chisel with the dulled end to the pendular lever.

We take out the right side draft.

Similarly we remove the left side draft.
We establish side draft so that to the lever of a rotary fist the long tip fastened.
Having replaced draft, we check a convergence of wheels (see the Angles of installation of forward wheels).