19:11. Removal of a bipod


Work is carried out on a viewing ditch or the elevator.

Head "on 30" we weaken a nut of fastening of a bipod.

We remove the steering mechanism from the car (see Removal of the steering mechanism and adjustment of a gap in bearings of a worm).

Stripper we press a bipod from a shaft.

In the absence of a stripper we dismantle a bipod by a shock method. We rest a bipod shaft against wooden whetstone.

By sledge hammer it is pressed on one emphasis of a bipod, and we beat the second with the hammer.

In certain cases it is necessary to cut a bipod the detachable machine.

The bipod is established on conic vents of a shaft only in one situation: at coincidence of a dual groove of a bipod and the shaft doubled a vent.