17.6. Removal of a reducer of the back bridge

 PERFORMANCE ORDER

Work is carried out on a viewing ditch or the elevator.

We remove a reducer for its replacement, repair or replacement of a beam of the back bridge.
We hang out the back bridge.
We merge oil from a case of the back bridge (see Replacement of oil in the back bridge).
We remove both half shafts (see Removal of a half shaft and replacement of an epiploon).
We disconnect the back driveshaft from a flange of a reducer of the back bridge (see Removal of the driveshaft).

Holding a reducer case, a head "on 12" we turn off eight bolts of its fastening to a beam of the back bridge.

We remove a reducer …

… and sealing laying.
We establish a reducer in the return sequence.
Before installation of a reducer we clear the privalochny plane of a beam. We establish new sealing laying. Before a wraparound of bolts of fastening of a reducer to a beam of the back bridge we apply sealant on a carving of bolts.