15.5. Removal of a reducer of the forward bridge

 PERFORMANCE ORDER

Work is carried out on the elevator or a viewing ditch.

We merge oil from a reducer of the forward bridge (see Replacement of oil in a reducer of the forward bridge).
We disconnect from a reducer of the forward bridge the driveshaft (see Removal of the driveshaft).
We dismantle the right drive (see Removal of drives of forward wheels).
We disconnect the left lower spherical support from the lever (see Removal of the lower spherical support).
We remove the left extension of a forward suspension bracket (see Removal of an extension).

Cap key "on 13" we turn off three nuts of fastening of a cover of the bearing of the case of the internal hinge of the left drive to a reducer of the forward bridge.

Assembly shovel we hook a bearing cover...

… and, delaying a rotary fist with the drive to the left, we bring a shlitsevy part of the case of the internal hinge of the drive out of a reducer case opening.

We take away the case of the internal hinge of the drive back.

We put an emphasis under a reducer.
Cap key "on 19" we turn off two nuts of fastening of a reducer:

to an arm of the block of cylinders …

… and to the left arm of an engine mount.

Having removed an emphasis from under a reducer, …

… we remove it.

We establish a reducer in the return sequence.