15.4. Replacement of the bearing and epiploon of the case of the internal hinge of the drive

 PERFORMANCE ORDER

Work is carried out on the elevator or a viewing ditch.

We remove the right drive of a forward wheel (see Removal of drives of forward wheels).

By nippers it is removed a lock ring.

We remove a spring washer.

The hammer with plastic brisk we force down from a shaft a cover of the bearing of the case of the internal hinge together with the bearing.

We remove the bearing.

Passatizhami is taken from a pro-point of an external ring of the bearing an adjusting ring.

We uncover the bearing with an epiploon.

For replacement of an arm of fastening of the forward bridge …

… we remove it.

Tool head of suitable diameter (suitable piece of a pipe) we beat out an epiploon …

… also we take out it from a cover.

Having greased a surface of a new epiploon with Litol-24 lubricant, we press it in a cover a suitable piece of a pipe.
We make assembly and installation of knot in the return sequence.
Similarly we replace the bearing and an epiploon of the case of the internal hinge of the left drive.

The epiploon of the case of the internal hinge of the left drive differs from an epiploon of the right drive.