14.3. Removal of the driveshaft

 PERFORMANCE ORDER

Work is carried out on a viewing ditch or the elevator.

Key "on 13" we turn off four nuts of bolts of fastening of a fork of the hinge of the back driveshaft to a flange of a reducer of the back bridge.

We hold bolts from a provorachivaniye the shlitsevy screw-driver inserted between lysky heads of a bolt and a fork.

We take out bolts. Similarly we disconnect a fork of the cardan hinge from a flange of a shaft of the drive of the back bridge of the transfer case.

We remove the back driveshaft.

Having disconnected forks of hinges of the forward driveshaft from flanges of a reducer of the forward bridge and a shaft of the drive of the forward bridge of the transfer case, …

… we remove the forward driveshaft.

We establish shaft in the return sequence.