13.7. Replacement of the switch of a control lamp of blocking of differential

 PERFORMANCE ORDER

We replace the switch of a control lamp of blocking of differential from interior of the car.
We remove facing of a tunnel of a floor (see Removal of facing of a tunnel of a floor).

By the crosswise screw-driver it is turned off four self-tapping screws of fastening of a plastic cover of levers (the fifth self-tapping screw – the general with fastening of facing of a tunnel of a floor).

Having pulled, we remove a head of the lever of an adventure of transfers.

Similarly we remove a head of the lever of blocking of differential.

We remove from levers rubber covers with a plastic cover.

We remove the lower rubber cover.

We disconnect wires from the switch of a control lamp of blocking of differential.

Head "on 27" we unscrew the switch.

The switch is condensed with a copper ring.

We install the switch of a control lamp of blocking of differential in the return sequence.