log in перевод

13.4. Replacement of epiploons of shaft of the transfer case

 PERFORMANCE ORDER

Work is carried out on a viewing ditch or the elevator.

We replace epiploons of shaft of drives of forward and back bridges, having disconnected flanges of driveshafts (see Removal of the driveshaft). We change an epiploon of the leading shaft of the transfer case only after its dismantle. Operations on replacement of all three epiploons are identical – we will show them on the example of an epiploon of a shaft of the drive of the back bridge.

We insert two bolts into openings of a flange and we screw on them nuts.

Head "on 24" we turn off a nut of fastening of a flange, keeping him from a pro-collar the assembly shovel implanted between bolts.

We remove a washer …

… and flange.

We hook an epiploon the screw-driver …

… also we remove it.

We grease a working surface of a new epiploon with Litol-24 lubricant...

... also we press its suitable piece pipes.

Epiploons of shaft of the transfer case are identical by the size. At the same time they have the different directions of maslosgonny notches.

Installation of the dismantled details is carried out upside-down. We tighten a nut of a flange a dynamometer key the ordered moment (see the Moments of an inhaling of threaded connections). We check oil level (see oil Replacement) and, if necessary, we add.