10.6. Removal of the working cylinder of a hydraulic actuator of coupling

 PERFORMANCE ORDER

Work is carried out on a viewing ditch or the elevator.

We remove an ottyazhny spring.

Passatizhami we take out the forelock from an opening in a pusher.

Head "on 13" we turn off two bolts of fastening of the working cylinder to a coupling case.

Key "on 22" we turn the cylinder for a case stopper, holding a key "on 17" a hose tip.

We separate the working cylinder and a hose – connection is condensed with a copper ring.

We install the working cylinder in the return sequence. We pump over a hydraulic actuator (see Pumping of a hydraulic actuator of coupling).